Jacketed Ceramic Ball Valve

 Typical applications for Foyo 2-Way jacketed ceramic ball valves:

FOYO jacketed ceramics ball valves are especially used for abrasive and/or corrosive mediums that must be influenced through additional heating or cooling to avoid being crystallized or seized.

Main Features and advantages:

The welded jackets consisting of two shells reach from flange to flange and assure consistent valve heating or cooling of the process medium to prevent crystallization or seizing of flow medium. The medium, such as bitumen, liquid sulfur, resins, etc. In addition, the efficient flow of medium is ensured through the elimination of pockets. Oil, steam, water, brine can be used as carrier for heating or cooling medium. The special valve design allows the hydrostatic and pneumatic examination of the valve body prior to the jacket welding process. Following our standard valve testing and inspection, every valve is tested again after the jackets have been welded onto the body.

Valve Design:

FOYO jacketed ceramic ball valves can be supplied as 2-way with flanged ends. Thanks to the high performance of advanced ceramics, FOYO jacketed valves have outstanding corrosion resistance and abrasion resistance.

Specification

FOYO JACKETED CERAMIC BALL VALVE

BODY :   ASTM A105, ASTM A182 F304, F316

BALL :     ZrO2 ceramics, Si3N4 Ceramics, Solid Tungsten Carbide Ceramics

STEM:     SS304, SS316, Hastelloy C276

SEAT :     99% Alumina Ceramics, ZrO2 Ceramics, Si3N4 Ceramics, Solid Tungsten Carbide Ceramics

ENDS :    FLANGED END , EN1092-1 PN10/PN16, ANSI 150LB

SIZE RANGE : DN15 to DN200,  1/2”-8”